[IGSSTATION-4824] WHC1: receiver and antenna swap

[David Maggert]

Author: David Maggert, UNAVCO

Dear Colleagues,

The Whittier College (WHC1) IGS station recently had a new receiver and 
antenna installed.  The new antenna and receiver details are listed below:

3.4  Receiver Type            : TPS NET-G3A
      Satellite System         : GPS
      Serial Number            : 618-01156
      Firmware Version         : 3.6 Feb,28,2012 p1
      Elevation Cutoff Setting : 5
      Date Installed           : 2012-03-12T22:57Z
      Date Removed             : (CCYY-MM-DDThh:mmZ)
      Temperature Stabiliz.    : none
      Additional Information   :


4.2  Antenna Type             : TPSCR.G3        SCIS
      Serial Number            : 383-1860
      Antenna Reference Point  : BPA
      Marker->ARP Up Ecc. (m)  : 0.0000
      Marker->ARP North Ecc(m) : 0.0000
      Marker->ARP East Ecc(m)  : 0.0000
      Alignment from True N    : 0
      Antenna Radome Type      : SCIS
      Radome Serial Number     : 0548
      Antenna Cable Type       :
      Antenna Cable Length     :
      Date Installed           : 2012-03-12T22:57Z
      Date Removed             : (CCYY-MM-DDThh:mmZ)
      Additional Information   : SCIS radome installed.  Antenna cable 
the same
                               : as before and the details are unknown.


The updated site log has been posted at the IGSCB.

ftp://igscb.jpl.nasa.gov/igscb/station/log/whc1_20120314.log

Maintenance and operation of this site is performed by the USGS.

Best Regards,
David Maggert