[IGSSTATION-7100] kit3 data failure

[Markus Ramatschi]

Author: Markus Ramatschi

Dear colleagues,

we lost our data logging PC in Kit3 due to hardware problems. To fill in 
the gap I enabled the data logging via direct tcp stream to the 
receiver. Unfortunately I used the wrong source IP. In fact it was the 
IP of the receiver in Tashket (TASH). Thus I recorded TASH data but we 
published it as KIT3 data. Please remove all KIT3 data from 2017, doy 
226 hour l to doy 229 hour n.

I apologize for the inconvenience!

Kind regards,
Markus Ramatschi

-- 
___________________________________

Dr. Markus Ramatschi
Dipl.-Geophys.

Department 1.1
Tel.:  +49 (0)331/288-1746
Fax:   +49 (0)331/288-1759
Email: maram at gfz-potsdam.de

___________________________________

Helmholtz-Zentrum Potsdam
Deutsches GeoForschungsZentrum GFZ
Stiftung des oeff. Rechts Land Brandenburg Telegrafenberg A17, 14473 Potsdam