[IGSSTATION-6215] GOPE: firmware updated
Jakub Kostelecky
jako at pecny.pecny.cz
Thu Jun 25 09:11:15 PDT 2015
Author: Jakub Kostelecky
The firmware of the Topcon NetG3 receiver at the GOPE station was updated today
(2015-06-25 DOY 176) from version 4.0 Aug,03,2012 to 4.0 Dec,21,2012 p1. The
updated site info log is attached, it was upload to EPN CB and it will be sent
to IGS CB.
Best Regards,
Jakub Kostelecky
Geodetic Observatory Pecny
Research Institute of Geodesy, Topography and Cartography
Czech Republic
www.pecny.cz,www.vugtk.cz
-------------- next part --------------
GOPE Site Information Form (site log)
International GNSS Service
See Instructions at:
ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt
0. Form
Prepared by (full name) : Jakub Kostelecky
Date Prepared : 2015-06-25
Report Type : UPDATE
If Update:
Previous Site Log : gope_20140512.log
Modified/Added Sections : 3.7, 3.10, 3.11
1. Site Identification of the GNSS Monument
Site Name : Pecny, Ondrejov / CZ
Four Character ID : GOPE
Monument Inscription :
IERS DOMES Number : 11502M002
CDP Number : (A4)
Monument Description : PILLAR ABOVE THE ROOF
Height of the Monument : 11.6 m
Monument Foundation : ROOF OF BUILDING
Foundation Depth : 3.6 m
Marker Description : CENTER OF HOLE IN STEEL PLATE
Date Installed : 1992-06-13T00:00Z
Geologic Characteristic : BEDROCK
Bedrock Type : METAMORPHIC
Bedrock Condition : WEATHERED
Fracture Spacing : 51-200 cm
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : Height of pillar above roof is 4.4 m.
: Height of point above ground is 11.6 m.
2. Site Location Information
City or Town : Ondrejov
State or Province : Bohemia
Country : Czech Republic
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 3979316.134
Y coordinate (m) : 1050312.478
Z coordinate (m) : 4857067.108
Latitude (N is +) : +495449.34
Longitude (E is +) : +0144708.24
Elevation (m,ellips.) : 592.6
Additional Information : ITRF2005, epoch 001/2005
3. GNSS Receiver Information
3.1 Receiver Type : TRIMBLE 4000SSE
Satellite System : GPS
Serial Number : 2185
Firmware Version : 5.52
Elevation Cutoff Setting : 15 deg
Date Installed : 1995-05-13T00:00Z
Date Removed : 1997-06-10T23:59Z
Temperature Stabiliz. : 22.0 +/- 4.0
Additional Information : SN 3301A02185
3.2 Receiver Type : SPP GEOTRACER100
Satellite System : GPS
Serial Number : 1504
Firmware Version : 4.34
Elevation Cutoff Setting : 15 deg
Date Installed : 1997-06-11T00:00Z
Date Removed : 1997-06-19T19:15Z
Temperature Stabiliz. : 22.0 +/- 4.0
Additional Information : SN 3108A01504A
3.3 Receiver Type : TRIMBLE 4000SSE
Satellite System : GPS
Serial Number : 2185
Firmware Version : 7.24
Elevation Cutoff Setting : 15 deg
Date Installed : 1997-06-20T00:00Z
Date Removed : 1999-11-04T12:00Z
Temperature Stabiliz. : 22.0 +/- 4.0
Additional Information : SN 3301A02185
3.4 Receiver Type : ASHTECH Z18
Satellite System : GPS+GLO
Serial Number : 000113
Firmware Version : 0064
Elevation Cutoff Setting : 5 deg
Date Installed : 1999-11-04T13:00Z
Date Removed : 2000-07-24T12:36Z
Temperature Stabiliz. : 22.0 +/- 4.0
Additional Information : SN ZX00113
3.5 Receiver Type : TRIMBLE 4000SSE
Satellite System : GPS
Serial Number : 2185
Firmware Version : 7.24
Elevation Cutoff Setting : 5 deg
Date Installed : 2000-07-24T17:02Z
Date Removed : 2000-10-04T11:00Z
Temperature Stabiliz. : 22.0 +/- 4.0
Additional Information : SN 3301A02185
3.6 Receiver Type : ASHTECH Z18
Satellite System : GPS+GLO
Serial Number : 000113
Firmware Version : 0064
Elevation Cutoff Setting : 5 deg
Date Installed : 2000-10-04T11:30Z
Date Removed : 2001-07-18T11:00Z
Temperature Stabiliz. : 22.0 +/- 4.0
Additional Information : SN ZX00113
3.7 Receiver Type : ASHTECH Z18
Satellite System : GPS+GLO
Serial Number : 00113
Firmware Version : 0065
Elevation Cutoff Setting : 5 deg
Date Installed : 2001-07-18T12:00Z
Date Removed : 2009-12-14T07:20Z
Temperature Stabiliz. : 25.0 +/- 4.0
Additional Information : SN ZX00113
3.8 Receiver Type : TPS NETG3
Satellite System : GPS+GLO
Serial Number : 01308
Firmware Version : 3.4 May,13,2009
Elevation Cutoff Setting : 0 deg
Date Installed : 2009-12-14T10:30Z
Date Removed : 2010-05-20T09:45Z
Temperature Stabiliz. : 24.0 +/- 2.0
Additional Information : air conditioning
: SN 401-01308
3.9 Receiver Type : TPS NETG3
Satellite System : GPS+GLO
Serial Number : 01308
Firmware Version : 3.4 Dec,12,2009p2
Elevation Cutoff Setting : 0 deg
Date Installed : 2010-05-20T10:00Z
Date Removed : 2013-03-19T22:00Z
Temperature Stabiliz. : 21.0 +/- 1.0
Additional Information : air conditioning
: SN 401-01308
3.10 Receiver Type : TPS NETG3
Satellite System : GPS+GLO
Serial Number : 01308
Firmware Version : 4.0 Aug,03,2012
Elevation Cutoff Setting : 0 deg
Date Installed : 2013-03-19T22:00Z
Date Removed : 2015-06-25T14:31Z
Temperature Stabiliz. : 21.0 +/- 1.0
Additional Information : air conditioning
: SN 401-01308
3.11 Receiver Type : TPS NETG3
Satellite System : GPS+GLO
Serial Number : 01308
Firmware Version : 4.0 Dec,21,2012 p1
Elevation Cutoff Setting : 0 deg
Date Installed : 2015-06-25T15:21Z
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : 21.0 +/- 1.0
Additional Information : air conditioning
: SN 401-01308
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : TRM14532.00 NONE
Serial Number : 66682
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0464
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : NONE
Radome Serial Number :
Antenna Cable Type : TRIMBLE PN 14551-00
Antenna Cable Length : 30 m
Date Installed : 1995-05-13T00:00Z
Date Removed : 1999-11-04T12:00Z
Additional Information : Before 25-JUN-1999 antenna type in RINEX
: files was marked as 4000ST L1/L2 GEOD
: SN 3250A66682
4.2 Antenna Type : ASH701073.3 SNOW
Serial Number : 000110
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0464
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SNOW
Radome Serial Number :
Antenna Cable Type : ASHTECH PN 100914 REV A 08MQO 9835
Antenna Cable Length : 30 m
Date Installed : 1999-11-04T13:00Z
Date Removed : 2000-07-24T12:36Z
Additional Information : Antenna manufacture label:
: Model: Choke Ring Antenna GG
: Part No: 701073 Rev: 3
: Serial No: CRG1998380110
4.3 Antenna Type : TRM14532.00 NONE
Serial Number : 66682
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0464
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : NONE
Radome Serial Number :
Antenna Cable Type : TRIMBLE PN 14551-00
Antenna Cable Length : 30 m
Date Installed : 2000-07-24T17:02Z
Date Removed : 2000-10-04T11:00Z
Additional Information : SN 3250A66682
4.4 Antenna Type : ASH701946.3 SNOW
Serial Number : 03301
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0464
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SNOW
Radome Serial Number :
Antenna Cable Type : ASHTECH PN 100914 REV A 08MQO 9835
Antenna Cable Length : 30 m
Date Installed : 2000-10-04T11:30Z
Date Removed : 2006-01-20T08:00Z
Additional Information : Before 18-JUL-2001 12:00UT antenna type in
: RINEX files was marked as ASH701946.022 SNOW
: and serial number was 003301 (cutted to A5
: for SINEX format)
: Antenna manufacture label:
: Model: Choke Ring Antenna GG
: Part No: 701946-02 Rev: 3
: Serial No: CR420003301
4.5 Antenna Type : ASH701946.3 SNOW
Serial Number : 23102
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0467
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : SNOW
Radome Serial Number :
Antenna Cable Type : ASHTECH PN 100914 REV A 08MQO 9835
Antenna Cable Length : 30 m
Date Installed : 2006-01-24T11:00Z
Date Removed : 2006-07-14T12:00Z
Additional Information : Antenna manufacture label:
: Model: Choke Ring Antenna GG
: Part No: 701946-01 Rev: 3
: Serial No: CR320023102
4.6 Antenna Type : TPSCR3_GGD CONE
Serial Number : 70184
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.1114
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : CONE
Radome Serial Number :
Antenna Cable Type : ASHTECH PN 100914 REV A 08MQO 9835
Antenna Cable Length : 30 m
Date Installed : 2006-07-14T12:50Z
Date Removed : 2009-12-14T07:20Z
Additional Information : Antenna manufacture label:
: TOPCON
: P/N: 01-031401-01
: S/N: 217 0184
4.7 Antenna Type : TPSCR.G3 TPSH
Serial Number : 30161
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.1114
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : TPSH
Radome Serial Number :
Antenna Cable Type : ASHTECH PN 100914 REV A 08MQO 9835+SPLITTER
Antenna Cable Length : 32 m
Date Installed : 2009-12-14T10:30Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : Antenna manufacture label:
: TOPCON
: P/N: 01-044301-01
: S/N: 383-0161
: Antenna is connected through 30 m cabel,
: surge arrestor, two-way splitter and
: 2 m cabel to receiver
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.1 Tied Marker Name : EUREF 0209
Tied Marker Usage : TRIANGULATION STATION
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : 11502M001
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : -65.9815
dy (m) : 84.6572
dz (m) : 33.1807
Accuracy (mm) : 1
Survey method : GPS CAMPAIGN
Date Measured : 1994-04-01T00:00Z
Additional Information : The vector is referred to the reference point
: of GOPE (mark on the top of the concrete
: pillar) i.e. dx = x (0209) - x (GOPE).
5.2 Tied Marker Name : GOP3
Tied Marker Usage : EXCENTRIC PILLAR
Tied Marker CDP Number : GOP3
Tied Marker DOMES Number : 11502M003
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : 2.0465
dy (m) : 2.5846
dz (m) : -2.1997
Accuracy (mm) : 1
Survey method : GPS CAMPAIGN
Date Measured : 2008-03-01T00:00Z
Additional Information : The vector is referred to the reference point
: of GOPE (mark on the top of the concrete
: pillar) i.e. dx = x (GOP3) - x (GOPE).
: Date measured is mean epoch - results are
: average form 24 days of measurement.
5.3 Tied Marker Name : GOP4
Tied Marker Usage : EXCENTRIC PILLAR for GNSS TIME receiver
Tied Marker CDP Number : GOP4
Tied Marker DOMES Number : 11502M004
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : 2.4312
dy (m) : 1.6166
dz (m) : -2.3066
Accuracy (mm) : 1
Survey method : GPS CAMPAIGN
Date Measured : 2008-03-03T00:00Z
Additional Information : The vector is referred to the reference point
: of GOPE (mark on the top of the concrete
: pillar) i.e. dx = x (GOP4) - x (GOPE).
: Date measured is mean epoch - results are
: average form 44 days of measurement.
5.4 Tied Marker Name : GOP5
Tied Marker Usage : EXCENTRIC PILLAR
Tied Marker CDP Number : GOP5
Tied Marker DOMES Number : 11502M005
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : 2.8196
dy (m) : 0.6237
dz (m) : -2.4174
Accuracy (mm) : 1
Survey method : GPS CAMPAIGN
Date Measured : 2008-03-02T00:00Z
Additional Information : The vector is referred to the reference point
: of GOPE (mark on the top of the concrete
: pillar) i.e. dx = x (GOP5) - x (GOPE).
: Date measured is mean epoch - results are
: average form 26 days of measurement.
5.5 Tied Marker Name : GOP6
Tied Marker Usage : EXCENTRIC PILLAR
Tied Marker CDP Number : GOP6
Tied Marker DOMES Number : 11502M006
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : 3.2001
dy (m) : -0.3343
dz (m) : -2.5319
Accuracy (mm) : 1
Survey method : GPS CAMPAIGN
Date Measured : 2008-02-24T00:00Z
Additional Information : The vector is referred to the reference point
: of GOPE (mark on the top of the concrete
: pillar) i.e. dx = x (GOP6) - x (GOPE).
: Date measured is mean epoch - results are
: average form 36 days of measurement.
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 1995-05-13/2009-12-14
Notes : exact end date: 2009-12-14T07:20Z
6.2 Standard Type : EXTERNAL CESIUM
Input Frequency : 10 MHz
Effective Dates : 2009-12-14/CCYY-MM-DD
Notes : exact start date: 2009-12-14T10:30Z
: Symmetricom 5071A cesium atomic clock
: Frequency steered to national standard
: TP (Tempus Pragensis) by GNSS time transfer
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.1 Instrumentation Type : VISUAL ASTROMETRY
Status : PERMANENT
Effective Dates : 1970-01-01/CCYY-MM-DD
Notes : Circumzenithal VUGTK 100/1000
: Exact date in 1970 not known
7.2 Instrumentation Type : EARTH TIDAL GRAVIMETER
Status : PERMANENT
Effective Dates : 1976-04-22/CCYY-MM-DD
Notes : Askania GS15 (No.228)
: Tidal station ICET No. 0930 Pecny
7.3 Instrumentation Type : ABSOLUTE GRAVIMETER
Status : PERMANENT
Effective Dates : 1978-10-04/CCYY-MM-DD
Notes : Epoch measurements in 1978, 1983, 1986, 1992,
: 1993, 2x 1995, 1996, 1997, 2x 1998, 2000,
: periodically from 2001 (own FG5 No. 215)
7.4 Instrumentation Type : SUPERCONDUCTING GRAVIMETER
Status : PERMANENT
Effective Dates : 2007-02-14/CCYY-MM-DD
Notes : GWR OSG-050
: GGP station PE
7.5 Instrumentation Type : SEISMOMETER
Status : PERMANENT
Effective Dates : 2009-05-14/CCYY-MM-DD
Notes : Very-broad-band seismometer Guralp CMG-3TD
: instaled in 60 m depth borehole
: Seismic station GOPC
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.1 Humidity Sensor Model : HG421.65
Manufacturer : COMET, Czech Republic
Serial Number : 9843035
Data Sampling Interval : 60 s
Accuracy (% rel h) : 3.0
Aspiration : NATURAL
Height Diff to Ant : -0.23 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 1999-11-04/2009-04-15
Notes : older sensor since 1996
8.1.2 Humidity Sensor Model : HG421.65
Manufacturer : COMET SYSTEM, Czech Republic
Serial Number : 02430108
Data Sampling Interval : 60 s
Accuracy (% rel h) : 3.0
Aspiration : NATURAL
Height Diff to Ant : -0.55 m
Calibration date : 2009-04-17
Effective Dates : 2009-04-15/CCYY-MM-DD
Notes : (multiple lines)
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.1 Pressure Sensor Model : TMAG 518 R3F
Manufacturer : CRESSTO, Roznov p. R., Czech Republic
Serial Number : 491/98
Data Sampling Interval : 60 s
Accuracy : 0.4 hPa
Height Diff to Ant : -0.18 m
Calibration date : 2001-07-26
Effective Dates : 1999-11-04/2001-05-24
Notes : older sensor since 1990
8.2.2 Pressure Sensor Model : TMAG 518 Z3F
Manufacturer : CRESSTO, Roznov p. R., Czech Republic
Serial Number : 713/01
Data Sampling Interval : 60 s
Accuracy : 0.4 hPa
Height Diff to Ant : -0.18 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2001-05-24/2002-05-03
Notes : (multiple lines)
8.2.3 Pressure Sensor Model : TMAG 518 N4F
Manufacturer : CRESSTO, Roznov p. R., Czech Republic
Serial Number : 1118/01
Data Sampling Interval : 60 s
Accuracy : 0.4 hPa
Height Diff to Ant : -0.18 m
Calibration date : 2001-07-26
Effective Dates : 2002-05-03/2009-12-14
Notes : (multiple lines)
8.2.4 Pressure Sensor Model : T7410
Manufacturer : COMET SYSTEM, Czech Republic
Serial Number : 08960984
Data Sampling Interval : 60 s
Accuracy : 0.4 hPa
Height Diff to Ant : -0.43 m
Calibration date : 2009-04-17
Effective Dates : 2009-12-14/CCYY-MM-DD
Notes : (multiple lines)
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.1 Temp. Sensor Model : NS520.65-120
Manufacturer : COMET, Czech Republic
Serial Number : 9838033
Data Sampling Interval : 60 s
Accuracy : 0.4 deg C
Aspiration : UNASPIRATED
Height Diff to Ant : -0.27 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 1999-11-04/2009-04-15
Notes : older sensor since 1996
8.3.2 Temp. Sensor Model : NS520.65-120
Manufacturer : COMET, Czech Republic
Serial Number : 9838033
Data Sampling Interval : 60 s
Accuracy : 0.4 deg C
Aspiration : UNASPIRATED
Height Diff to Ant : -0.50 m
Calibration date : 2009-04-17
Effective Dates : 2009-04-15/CCYY-MM-DD
Notes : moved to new meteorologic chamber
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.1 Water Vapor Radiometer : TP/WVP-3000
Manufacturer : RADIOMETRICS, USA
Serial Number : 3025
Distance to Antenna : 1.14 m
Height Diff to Ant : 0.10 m
Calibration date : 2006-09-14
Effective Dates : 2006-09-11/CCYY-MM-DD
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.1 Other Instrumentation : wind direction
: Vaisala, FI
: model WAV151
8.5.2 Other Instrumentation : wind speed
: Vaisala, FI
: model WAA151
8.5.3 Other Instrumentation : precipitation gauge
: Meteoservis, CZ
: model MR3H (heated)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.1 Signal Obstructions : TREES
Effective Dates : 1995-05-13/2001-12-17
Additional Information : 2001-10-25/2001-12-17 reduction obstructions
: in elevation angles between 10 and 25 degrees
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : Research Institute of Geodesy, Topography
: and Cartography, p.r.i.
: Geodetic Observatory Pecny
Preferred Abbreviation : RIGTC GOP
Mailing Address : Geodetic Observatory Pecny
: CZ-25165 Ondrejov 244, Czech Republic
Primary Contact
Contact Name : Jakub Kostelecky
Telephone (primary) : ++420 323649235
Telephone (secondary) :
Fax : ++420 323649236
E-mail : jakub.kostelecky at pecny.cz
Secondary Contact
Contact Name : Jan Dousa
Telephone (primary) : ++420 323649235
Telephone (secondary) :
Fax : ++420 323649236
E-mail : jan.dousa at pecny.cz
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : OLG
Secondary Data Center : BKGI
URL for More Information : http://www.pecny.cz
Hardcopy on File
Site Map : Y
Site Diagram : Y
Horizon Mask : Y
Monument Description : Y
Site Pictures : Y
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
TRM14532.00 (former name 4000ST L1/L2 GEOD)
----+---- <-- 0.070 L1
/ + \ <-- 0.068 L2
++----------------+-----------------+-----------------++ <-- 0.063 TGP
++---------------+-------------------+----------------++ <-- 0.060 BGP
| |
| |
| |
+------x------+ <-- 0.0 ARP=BPA
<-- 0.140 --> BPA
<-- 0.155 --> TPA
<-- 0.467 --> NOTCHES
<-- 0.483 --> EDGE
ASH701073.3 SNOW (= 701073 RADOME)
. --- . <-- 0.420
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .---. . <-- 0.140
/ \
+ / + \ + <-- 0.128 L2
. | + | . <-- 0.110 L1
|+-------------------------------------------------+| <-- 0.101 TCR
.| |.
|| ||
.| |.
+| |+
+-+-------------------------------------------------+-+ <-- 0.038
+-------------------+-------------+-------------------+ <-- 0.035 BCR
| |
=| |
+------x------+ <-- 0.0 ARP=BPA
<-- 0.120 --> Preamp
<-- 0.360 --> Ch.Ring
<-- 0.374 --> Dome
<-- 0.380 --> Gr.Plate
ASH701946.3 SNOW (former name ASH701946.022 SNOW)
. --- . <-- 0.420
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .
/ \
. .---. . <-- 0.140
/ \
+ / + \ + <-- 0.1284 L2
. | + | . <-- 0.1098 L1
|+-------------------------------------------------+| <-- 0.1012 TCR
.| |.
|| ||
.| |.
+| |+
+-+-------------------------------------------------+-+ <-- 0.0380
+-------------------+-------------+-------------------+ <-- 0.0349 BCR
| |
=| |
+------x------+ <-- 0.0 ARP=BPA
<-- 0.119 --> Preamp
<-- 0.360 --> Ch.Ring
<-- 0.373 --> Dome
<-- 0.379 --> Gr.Plate
TPSCR3_GGD CONE
_ <-- 0.33
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ \
/ --------- \
/ / + \ \ <-- 0.104 L2
/ | + | \ <-- 0.081 L1
|+-------------------------------------------------+| <-- 0.071 TCR
|| ||
| | <-- 0.051 BofRadome
| |
| |
+-----------------+-------------+-----------------+ <-- 0.003 BCR
+-----x-----+ <-- 0.0 BPA=ARP
<-- 0.326 -->
<-- 0.331 -->
TPSCR.G3 TPSH
___-----------___ <-- 0.29
_ -- -- _
/ \
/ \
/ \
/ \
/ \
/ +-------+ \
| / \ |
| | | |
|+-----------------+-------------+-----------------+| <-- 0.1015 TCR
|| ||
|| ||
|| ||
|| ||
+-+-------------------------------------------------+-+
+-------------------+-------------+-------------------+ <-- 0.0345 BCR
| |
| |
+------x------+ <-- 0.0000 BPA=ARP
<-- 0.2380 -->
<-- 0.3800 -->
TPSCR.G3 TPSH (after 2009-12-14)
___-----------___ <-- 0.40
_ -- -- _
/ \
/ \
/ \
/ \
/ \
/ +-------+ \
| / \ |
| | | |
|+-----------------+-------------+-----------------+| <-- 0.2129 TCR
|| ||
|| ||
|| ||
|| ||
+-+-------------------------------------------------+-+
+-------------------+-------------+-------------------+ <-- 0.1459 BCR
| |
| |
+------x------+ <-- 0.1114 BPA=ARP
| |
| |
| |
+-+-------+-+
| |
| |
Reference Point => +------- x -------+ <-- 0.0000
| |
| |
Monument => +-----------------------------+
| |
| Concrete Pillar |
| |
| |
Building => ------------------------------------
ARP: Antenna Reference Point
More information about the IGSSTATION
mailing list