[IGSSTATION-6960] KAT1: Firmware Upgrade and Data Upload [SEC=UNCLASSIFIED]

[Geodesy]

Author: Ryan Ruddick

Geoscience Australia
Australian Regional GPS Network

******************************************************************************
Site ID : KAT1
DOMES No: 59968M001
Location: Katherine (Northern Territory, AUSTRALIA)
******************************************************************************

The receiver at KAT1 was upgraded firmware version 5.1.1 at 2017-02-14T05:00Z.

3.9  Receiver Type            : SEPT POLARX5
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+IRNSS
     Serial Number            : 3012263
     Firmware Version         : 5.1.1
     Elevation Cutoff Setting : 0 deg
     Date Installed           : 2017-02-14T05:00Z
     Date Removed             : CCYY-MM-DDThh:mmZ
     Temperature Stabiliz.    : none
     Additional Information   : Firmware upgrade only

An upgraded station log file has been submitted to IGS CB and is available from the GA FTP server.

In addition the data from the time of the upgrade until present has been re-uploaded to the IGS DCs with the correct header information.

Apologies for any inconvenience that this may have caused.

Kind regards,

National Geodesy and GNSS Operations
Geoscience Australia.


Geoscience Australia Disclaimer: This e-mail (and files transmitted with it) is intended only for the person or entity to which it is addressed. If you are not the intended recipient, then you have received this e-mail by mistake and any use, dissemination, forwarding, printing or copying of this e-mail and its file attachments is prohibited. The security of emails transmitted cannot be guaranteed; by forwarding or replying to this email, you acknowledge and accept these risks.
-------------------------------------------------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.igs.org/pipermail/igsstation/attachments/20170222/5da23726/attachment.html>