[IGSSTATION-6251] YAR2: Firmware Change [SEC=UNCLASSIFIED]

[geodesy at ga.gov.au]

Author: Ryan Ruddick



Geoscience Australia

Australia Regional GNSS Network



******************************************************************************

Site ID : YAR2

DOMES No: 50107M004

Location: Yarragadee (WA, Australia)

******************************************************************************



Dear Colleagues,



The receiver firmware at YAR2 has been changed to a 2.9.0-Patch1.  The change occurred at 2015-07-24T00:00Z.



3.7  Receiver Type            : SEPT POLARX4TR

     Satellite System         : GPS+GLO+BDS+QZSS+SBAS

     Serial Number            : 3007654

     Firmware Version         : 2.9.0-Patch1

     Elevation Cutoff Setting : 0 deg

     Date Installed           : 2015-07-24T00:00Z

     Date Removed             : CCYY-MM-DDThh:mmZ

     Temperature Stabiliz.    : none

     Additional Information   : Firmware update only



An updated station log has been submitted to IGS CB and is also available from the Geoscience Australia FTP server.



Kind regards,



GNSS Networks Team.

Geoscience Australia

geodesy at ga.gov.au<mailto:geodesy at ga.gov.au>


Geoscience Australia Disclaimer: This e-mail (and files transmitted with it) is intended only for the person or entity to which it is addressed. If you are not the intended recipient, then you have received this e-mail by mistake and any use, dissemination, forwarding, printing or copying of this e-mail and its file attachments is prohibited. The security of emails transmitted cannot be guaranteed; by forwarding or replying to this email, you acknowledge and accept these risks.
-------------------------------------------------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.igs.org/pipermail/igsstation/attachments/20150727/ae9cb063/attachment.html>