[IGSSTATION-6197] XMIS: Firmware Upgrade [SEC=UNCLASSIFIED]
geodesy at ga.gov.au
geodesy at ga.gov.au
Tue Jun 16 20:06:15 PDT 2015
Author: Ryan Ruddick
Geoscience Australia
Australian Regional GNSS Network
******************************************************************************
Site ID : XMIS
DOMES No: 50183M001
Location: Christmas Island (Western Australia, AUSTRALIA)
******************************************************************************
Dear Colleagues,
The receiver firmware at the CORS XMIS was upgraded at 2015-06-17T00:00Z.
3.8 Receiver Type : TRIMBLE NETR9
Satellite System : GPS+GLO+GAL+BDS+QZSS
Serial Number : 5211K83159
Firmware Version : 5.01
Elevation Cutoff Setting : 0 deg
Date Installed : 2015-06-17T00:00Z
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : none
Additional Information :
An updated station log file has been submitted to IGSCB and is available from the GA FTP Server.
Kind Regards,
GNSS Network Team
Geoscience Australia
geodesy at ga.gov.au<mailto:geodesy at ga.gov.au>
Geoscience Australia Disclaimer: This e-mail (and files transmitted with it) is intended only for the person or entity to which it is addressed. If you are not the intended recipient, then you have received this e-mail by mistake and any use, dissemination, forwarding, printing or copying of this e-mail and its file attachments is prohibited. The security of emails transmitted cannot be guaranteed; by forwarding or replying to this email, you acknowledge and accept these risks.
-------------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.igs.org/pipermail/igsstation/attachments/20150617/06cbba3c/attachment.html>
More information about the IGSSTATION
mailing list