[IGSSTATION-4906] CHIL: receiver and antenna upgrade

[David Maggert]

Author: David Maggert, UNAVCO

Dear Colleagues,

The USGS recently upgraded the receiver and antenna at the Chilao (CHIL) 
IGS station.  The details of the new receiver and antenna are shown 
below.  While the antenna radome combination does not have robot 
calibration as required by the IGS, there may still be other users who 
find this station useful.

3.9  Receiver Type            : TPS NET-G3A
      Satellite System         : GPS
      Serial Number            : 618-01102
      Firmware Version         : 3.6 Feb,28,2012 p1
      Elevation Cutoff Setting : 5
      Date Installed           : 2012-05-08T19:10Z
      Date Removed             : (CCYY-MM-DDThh:mmZ)
      Temperature Stabiliz.    :
      Additional Information   :

4.4  Antenna Type             : TPSCR.G3        SCPL
      Serial Number            : 383-1822
      Antenna Reference Point  : BPA
      Marker->ARP Up Ecc. (m)  : 0.6440
      Marker->ARP North Ecc(m) : 0.0000
      Marker->ARP East Ecc(m)  : 0.0000
      Alignment from True N    : 0
      Antenna Radome Type      : SCPL
      Radome Serial Number     : N/A
      Antenna Cable Type       :
      Antenna Cable Length     :
      Date Installed           : 2012-05-08T19:10Z
      Date Removed             : (CCYY-MM-DDThh:mmZ)
      Additional Information   :



The updated site log has been posted at the IGSCB.

http://igscb.jpl.nasa.gov/igscb/station/log/chil_20120512.log

Maintenance and operation of this site is performed by the USGS.

Best Regards,
David Maggert