[IGSSTATION-1336]: Regarding station BAKO

Angelyn W. Moore Angelyn.W.Moore at jpl.nasa.gov
Wed Jan 17 17:49:13 PST 2007


******************************************************************************
IGS Station Mail          17 Jan 17:49:14 PST 2007      Message Number 1336
******************************************************************************

Author: Angelyn Moore

Dear Colleagues,

I have been notified from station BAKO that they installed a Leica AT504 GG 
antenna with LEIS radome on 1 January, and the antenna height changed to 1.648m.

There is no calibration for this equipment in igs05.atx, and although the IGS 
Site Guidelines (http://igscb.jpl.nasa.gov/network/guidelines/guidelines.html) 
state (2.1.8) "To use an antenna+radome pair not found in either of these files, 
contact the CB. A calibration from an independent, recognized laboratory such as 
NGS (http://www.ngs.noaa.gov/ANTCAL) or Geo++ (http://www.geopp.com) will be 
required," the CB was not notified in advance of this equipment change.

We understand that a calibration is forthcoming.  In the meantime, since site 
logs may not contain uncalibrated equipment, the revised site log cannot be 
installed.

Best regards,
Angie
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Angelyn W. Moore, Ph.D.            Deputy Director, IGS Central Bureau
  JPL/Caltech                               Angelyn.W.Moore at jpl.nasa.gov
  4800 Oak Grove Dr. MS 238-540                   voice: +1 818 354 5434
  Pasadena CA 91109 USA  http://igscb.jpl.nasa.gov  fax: +1 818 393 6686



More information about the IGSSTATION mailing list