[IGSMAIL-5490]: Change in SP3 header comment line / Clock RINEX
gend at gfz-potsdam.de
gend at gfz-potsdam.de
Wed Nov 22 06:54:54 PST 2006
******************************************************************************
IGS Electronic Mail 22 Nov 06:54:58 PST 2006 Message Number 5490
******************************************************************************
Author: Gerd Gendt
Dear colleagues,
For new launched satellites the rule is to define the sat ant offset
from the mean of existing satellites for that block, and replace later the
value with the first estimate. The history is traced by changing the
WWWW in the name of the ANTEX file.
SP3 comment line:
To allow a unique tracing of the used satellite offsets (especially in the
early phase) it was necessry to make a change in the SP3 header comment
line. Now the full name of the ANTEX file is given there.
We are using this 'event' to make some other slight formal changes in the
format. The new format is given below.
Sorry for the inconvenience this change may cause, but we decided to do it now
rather than to stick on a version not so easy to handle.
Clock RINEX:
In the clock RINEX file the name of the ANTEX file shall be given in the from:
(see ftp://igscb.jpl.nasa.gov/pub/data/format/rinex_clock.txt).
----|---1|0---|---2|0---|---3|0---|---4|0---|---5|0---|---6|0---|---7|0---|---8|
G Program_Name_____ IGS05_1400 SYS / PCVS APPLIED
R Program_Name_____ IGS05_1400 SYS / PCVS APPLIED
Best regards
Gerd Gendt
------------------------------------------------------------------------------
New proposal
Attention: The order is now ORB: ... CLK: ... !
(as the data records later are in this order x y z clock)
Comment line in the SP3 file - final version
----|---1|0---|---2|0---|---3|0---|---4|0---|---5|0---|---6|0---|---7|0---|---8|
/* PCV:IGS05_1400 OL/AL:FES2004 NONE YN ORB:CoN CLK:CoN
- format: ('/* PCV:',a10,' OL/AL:',2(a8,1x),2a1,' ORB:',a3,' CLK:',a3)
- Models applied during estimation of orbits
- PCV : Antanne model used
- OL/AL: Ocean and atmo tide loading models plus CMC flags:
OL_MODEL AL_MODEL FF
- OL_MODEL: Ocean tide loading model or COMBI or NONE
COMBI is given if not all AC submissions have used the same
- AL_MODEL: Atm tide loading model
(e.g. S1S2, or NONE )
- FF : two flags to report if CMC is included in the model (Y or
N)
- Corrections applied during generation of SP3
- ORB: CoN if CMC are corrected for applied loading models
CoM otherwise
- CLK: CoM or CoN or CMB or N/A;
CoN if staco are fixed to ITRF during CLK adjustment
CMB (for Combi) is given if not all AC submissions have used the
------------------------------------------------------------------------------
Examples:
/* PCV:IGS05_1400 OL/AL:FES2004 NONE Y ORB:CoN CLK:CoN
/* PCV:IGS05_1400 OL/AL:FES2004 NONE YN ORB:CoN CLK:CoN
/* PCV:IGS05_1400 OL/AL:FES2004 S1S2 YY ORB:CoN CLK:CoN
------------------------------------------------------------------------------
******************************************************************************
* Gerd Gendt *
* _/_/_/ _/_/_/_/_/_/ GeoForschungsZentrum *
* _/ _/ _/ Department Geodesy and Remote Sensing *
* _/ _/_/ _/_/ _/ Telegrafenberg A17 *
* _/ _/ _/ _/ D-14473 Potsdam , GERMANY *
* _/_/_/ _/ _/_/_/ Phone : ++49 331 288 1114 Fax :++49 331 288 1759 *
* E-Mail: gendt at gfz-potsdam.de *
* IGS GFZ AC : AFTP://ftp.gfz-potsdam.de/pub/igsprod *
* http://www.gfz-potsdam.de/igs *
* IGS Analysis Coord.: AFTP://ftp.gfz-potsdam.de/pub/igsacc *
* http://www.gfz-potsdam.de/igsacc *
******************************************************************************
More information about the IGSMail
mailing list