From arturo.villiger at aiub.unibe.ch Thu Mar 21 08:45:42 2019 From: arturo.villiger at aiub.unibe.ch (arturo.villiger at aiub.unibe.ch) Date: Thu, 21 Mar 2019 15:45:42 +0000 Subject: [IGS-Equipment-Files] igs14_2045.atx: Update including two new receiver antenna calibrations Message-ID: <32f670cb5ce94d61b9baf3012ca67d11@aiub.unibe.ch> Dear IGS colleagues, The absolute IGS antenna correction file (igs14_wwww.atx) has been updated. The new release is called 'igs14_2045.atx'. It contains the following changes: 1) One additional antenna type calibrations has been added that were performed by Geo++ GmbH: - One robot calibration provided Geomax AG has been added: GMXZENITH40 NONE 2) One additional antenna provided by Leica Geosystems AG was added. According to the manufacturer the antenna " LEIGG04 NONE" has the same pattern as the antenna "LEIGS18 NONE": LEIGG04 NONE (copy of LEIGS08PLUS NONE) The updated antenna correction model is available at ftp://ftp.igs.org/pub/station/general/igs14_2045.atx or ftp://ftp.igs.org/pub/station/general/igs14.atx With best regards, Arturo Villiger on behalf of the IGS Antenna Working Group ------------------------------------------------------------------------ Arturo Villiger Astronomical Institute University of Bern Sidlerstrasse 5 CH - 3012 Bern / Switzerland phone ++41 31 631 85 06 fax ++41 31 631 38 69 arturo.villiger at aiub.unibe.ch ------------------------------------------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: